Simulation Sound Unit Set for 1/18 1/24 1/28 Flat On-Road Rock Crawler Climbing Truck RC Cars Vehicles Models Spare Parts Accessories
Direct purchase from the factory 
Checkout garantit sikur
Rigal b'xejn
Politika tat-tbaħħir
Politika tar-ritornRigal B'Xejn
Merħba għal Roymall, is-sit professjonali tiegħek għal xiri ta' rigali ta' kwalità għolja. Napprezzaw is-sapport tiegħek u rridu nuruk gratitudni billi noffru rigal b'xejn ma' kull ordni.Politika tat-Tbaħħir
Oġġetti jintbagħtu fi żmien 2-5 ġranet tax-xogħol. Ordni ta' aktar minn $9.9 jintbagħtu b'xejn.1. Politika tar-Ritorn
Oġġetti jistgħu jintirbu sa 40 jum. Oġġetti personalizzati ma jistgħux jintirbu.2.Politika tar-Rifużjoni
Ir-rimi jintirbu bl-istess metodu ta' ħlas oriġinali.Description:
Item No.:SC0001/SC0002
Item Name:Sound Group
Material:Plastic Shell
Product Weight:15g
Suitable Models:1/28 1/24 1/18 Flat Car Climbing Car Universal
Packaging Size:8*12*1cm
Style:Diesel Version/Gasoline Version
Output Power:1W8 ohm 5V / 0.6 W8 ohm 3V
Signal Input:Positive Pulse 0.8 ms to 2.0 ms
Sound Quality:22.05 kHz Sampling Frequency
Memory:4M, 22.05 kHz Audio is About 20 Seconds
Note:
The power supply voltage of the sound group is up to 5V, and it must not exceed 5V. If it exceeds 5V, the built-in amplifier and microcontroller will be burned. If the BEC of the electric adjustment is 6V, it is recommended to connect 2 2A in series The rectifier diode removes power from the receiver, and the voltage drop is 1.2-1.4V, which supplies power to the sound group.
Control method:
After the control is turned on, when the throttle channel moves for the first time, the engine sound will automatically start. If the engine idles for more than 20 seconds, the engine sound will automatically turn off. After the throttle stick moves, the engine sound will start.
Neutral point setting:
Connect the speaker, ESC, and receiver (the receiver and control should be aligned with the frequency in advance), turn on the power of the remote control, power on the receiver, and then short-circuit (short-circuit) with tweezers or other conductive materials as shown in the figure. At this time, a beep will be emitted, indicating that the midpoint has been recorded, and then the throttle is pushed to the start/idle point. suspend for a while, and there will be another beep, indicating that the start/idle point has been recorded, and then push the throttle to the maximum, and there will be three beeps, and the whole setting is completed.
Package included:
1x Diesel Version/Gasoline Version Sound Group
